Leg Cuffs - Purple 65"

  • $100.00


Leg Cuff Costumes for Stilt Walkers

Purple Metallic Spandex - 65"


ONLY 1 set available of these cuffs!

The fabric of these leg cuffs is stretchy spandex

 

Product Measurements:

65" total length
20-26"  upper elastic leg cuff
32" at foot area (approx halfway down the length)
34" bottom cuff

Note:  These pants are NOT machine hemmed.

The fabric doesn't unravel so I left them unhemmed so you can cut them to length if desired.

 

If you would like me to hem them for you,
YOU WILL NEED TO LET ME KNOW WHEN YOU PLACE YOUR ORDER.

Hemming will decrease the final length by about an inch.

If you need them to be more than an inch shorter, let me know your measurement request when you request the hem to be made at order placement.

I ship orders out VERY FAST so if you don't make these requests when you place your order then the request may end up being too late.

Please be sure to make any hem requests WHEN YOU PLACE YOUR ORDER.



FABRIC CARE INSTRUCTIONS:

DO NOT IRON OR MACHINE DRY

Gentle Machine Wash or Handwash Cold. 

No bleach, light detergent only

Lay flat or hang to dry

Store in cool dry location

 

Kricket Caffery and PegStilts.com is not responsible if you damage your fabric due to mistreatment, not following care instructions, or falling down.

 


Sizing help for Leg Cuffs for Stilts:

FINDING MAXIMUM LENGTH:

 

1)  Measure your inseam (from the top of your inside of your thigh to the floor)

 

2)  Add the height of your stilts to your inseam measurement

 

3)  Subtract 4-6" for floor clearance (you don't want your pants/cuffs to go all of the way to the floor, it is a tripping/slipping hazard)

 

The measurement you get from doing steps 1-3 above is the maximum length of leg cuffs you would want.

 


FINDING MINIMUM LENGTH:

 

1)  Measure from the top of your kneepads to the floor

 

2)  Add the height of your stilts to the measurement above

 

3)  Subtract 4-6" for floor clearance (you don't want your pants/cuffs to go all of the way to the floor, it is a tripping/slipping hazard)

 

The measurement you get from doing steps 1-3 above is the minimum length of leg cuffs you would want.

 

 

 

Remember:

 

You can hem or roll pants/cuffs that are too long.

 

You can adjust leg cuffs by moving them up/down your thigh.

 

 

 

These leg cuffs are made for peg stilts and most drywall stilts.

 

DRYWALL STILT USERS:  Please measure the circumference of the widest point of your stilts to be sure these pants will work for you.

 

These leg cuffs are NOT made for use with bouncy/jumping stilts.

 


We Also Recommend