Leg Cuffs - White with red stripe 48.5"

  • $85.00


Leg Cuff Costumes for Stilt Walkers

White with red stripe 48.5"


ONLY 1 set available of these cuffs!

The fabric of these leg cuffs is not stretchy so be sure your measurements work!


Made from Polyester and satin fabric.

 

Product Measurements:

48.5" total length
21-26" upper elastic leg cuff
36" bottom cuff
36" at foot area (approx halfway down the length)



FABRIC CARE INSTRUCTIONS:

DO NOT IRON OR MACHINE DRY,

STEAM IRON IS GREAT.

Gentle Machine Wash or Handwash.

No bleach, light detergent only

Lay flat or hang to dry

 

Kricket Caffery and PegStilts.com is not responsible if you damage your fabric due to mistreatment, not following care instructions, or falling down.

 

 

Sizing help for Leg Cuffs for Stilts:

FINDING MAXIMUM LENGTH:

1)  Measure your inseam (from the top of your inside of your thigh to the floor)

2)  Add the height of your stilts to your inseam measurement

3)  Subtract 4-6" for floor clearance (you don't want your pants/cuffs to go all of the way to the floor, it is a tripping/slipping hazard)

The measurement you get from doing steps 1-3 above is the maximum length of leg cuffs you would want.


FINDING MINIMUM LENGTH:

1)  Measure from the top of your kneepads to the floor

2)  Add the height of your stilts to the measurement above

3)  Subtract 4-6" for floor clearance (you don't want your pants/cuffs to go all of the way to the floor, it is a tripping/slipping hazard)

The measurement you get from doing steps 1-3 above is the minimum length of leg cuffs you would want.

 

Remember:

You can hem or roll pants/cuffs that are too long.

You can adjust leg cuffs by moving them up/down your thigh.

 

These leg cuffs are made for peg stilts and most drywall stilts.

DRYWALL STILT USERS:  Please measure the circumference of the widest point of your stilts to be sure these pants will work for you.

These leg cuffs are NOT made for use with bouncy/jumping stilts.


We Also Recommend