Stilt Covers - Shiny Blue 65" length - FLAWED

  • $50.00
  • Save $30


Stilt Cover Leg Cuffs - Costumes for Stilt Walkers
Stilt Covers - Shiny Blue 65" length - FLAWED


ONLY 1 set available of these cuffs!

The fabric of these leg cuffs is stretchy.

The fabric of these pants is damaged/flawed, but I didn't want to throw it away, it is perfectly usable.

The fabric itself is fine, no holes or tears, it was just at the end of the bolt and has discolorations, as shown in the images of the product, that is why this set is priced so low compared to the other sets in the store.


Product Measurements:

65" total length
20-24" upper elastic
32" at foot area (approx halfway down the length)
35" bottom cuff

Spandex fabric does not unravel and has a tendency to bunch up and get wavy when hemmed so PegStilts.com spandex products are left unhemmed and can easily be cut to a shorter length IF desired.

IF you do need to shorten them, add a drop of permanent fabric glue to the serged stitch on the interior of the cuff to keep it from unravelling after you've cut to desired length.

FABRIC CARE INSTRUCTIONS:

DO NOT IRON OR MACHINE DRY

Gentle Machine Wash or Hand wash

No bleach, light detergent

Lay flat or hang to dry

 

Kricket Caffery and PegStilts.com is not responsible if you damage your fabric due to mistreatment, not following care instructions, or falling down.

 


Sizing help for Leg Cuffs for Stilts:

FINDING MAXIMUM LENGTH:

1)  Measure your inseam (from the top of your inside of your thigh to the floor)

2)  Add the height of your stilts to your inseam measurement

3)  Subtract 4-6" for floor clearance (you don't want your pants/cuffs to go all of the way to the floor, it is a tripping/slipping hazard)

The measurement you get from doing steps 1-3 above is the maximum length of leg cuffs you would want.

 


FINDING MINIMUM LENGTH:

1)  Measure from the top of your kneepads to the floor

2)  Add the height of your stilts to the measurement above

3)  Subtract 4-6" for floor clearance (you don't want your pants/cuffs to go all of the way to the floor, it is a tripping/slipping hazard)

The measurement you get from doing steps 1-3 above is the minimum length of leg cuffs you would want.

 

Remember:

You can hem or roll pants/cuffs that are too long.

You can adjust leg cuffs by moving them up/down your thigh.

 

These leg cuffs are made for peg stilts and most drywall stilts.

DRYWALL STILT USERS:  Please measure the circumference of the widest point of your stilts to be sure these pants will work for you.

These leg cuffs are NOT made for use with bouncy/jumping stilts.


We Also Recommend