Stilt Covers - Black with White Mini Polka Dots 65" length

Costumes for Stilt Walkers - Leg Cuff Stilt Covers
Black/White Mini Polka Dots 65" length

ONLY 1 set available of these cuffs

The cotton fabric of these stilt covers is NOT stretchy.
Please be sure your measurements are correct.

Product Measurements:

65" total length
20-26" upper elastic
31" at foot area (approx halfway down the length)
35" bottom cuff, hemmed

FABRIC CARE INSTRUCTIONS:

Gentle Machine Wash or Hand Wash. 

No bleach, light detergent

Lay flat, hang to dry, or machine dry on low

Okay to iron with steam
 

Kricket Caffery and PegStilts.com is not responsible if you damage your fabric due to mistreatment, not following care instructions, or falling down.

Sizing Help for Leg Cuffs for Stilts:

FINDING MAXIMUM LENGTH:

1)  Measure your inseam (from the top of your inside of your thigh to the floor)

 2)  Add the height of your stilts to your inseam measurement

 3)  Subtract 4-6" for floor clearance (you don't want your pants/cuffs to go all of the way to the floor, it is a tripping/slipping hazard)

The measurement you get from doing steps 1-3 above is the maximum length of leg cuffs you would want.

FINDING MINIMUM LENGTH:

 1)  Measure from the top of your kneepads to the floor

 2)  Add the height of your stilts to the measurement above

 3)  Subtract 4-6" for floor clearance (you don't want your pants/cuffs to go all of the way to the floor, it is a tripping/slipping hazard)

The measurement you get from doing steps 1-3 above is the minimum length of leg cuffs you would want.

Remember:

You can hem or roll pants/covers that are too long.

You can adjust stilt covers by pulling them up or lowering them down your thigh.

These stilt covers are made for peg stilts and most drywall stilts.

DRYWALL STILT USERS:  Please measure the circumference of the widest point of your stilts to be sure these pants will work for you.

These leg cuffs are NOT made for use with bouncy/jumping stilts.